56KFlex and V90

[MTL^Starman]

Hello

I am using the extra strung that is on your web site Slime, that limits the convection speed. The one i am using is:

"AT&FW2+MS=V90,,,31200,46667"
Now, i need to know if i can and how, to get my modem to only use 56KFlex.

What’s the best speeds i should put in, i have found them when i connect at 31200~34000 i get really good connection, but when i get to the higher speeds it just sits there and lags out.

Thanks
MTL^Starman

------------------
Clan Metal
www.clanmetal.co.uk
irc.barrysworld.com #metal

[Slime]

Hi,

Bearing in mind that Wireplay doesn't support K56flex - do you still want to do this ?

Cheers
Slime

------------------
Modem Forum (http://forums.gameplay.com/cgi-bin/ubb/forumdisplay.cgi?action=topics&number=31&SUBMIT=Go) Moderator
ISP Forum (http://forums.gameplay.com/cgi-bin/ubb/forumdisplay.cgi?action=topics&forum=Internet+Service+Providers&number=73&DaysPrune=) Moderator
Message Board Community Liaison

LagLess.com (http://www.lagless.com) - Slime's Modem&DUN Guide

[MTL^Starman]

Yes, i am sure!

I always got better a ping, than my m8 when i was on a flex only modem

------------------
Clan Metal
www.clanmetal.co.uk
irc.barrysworld.com #metal

[Slime]

Hi,

OK - but don't forget that it won't work when dialling into Wireplay Direct (and may not now work with many ISP's who are slowly stopping K56 access numbers).

However.....with luck it could be as simple as using this :-

AT&FW2+MS=K56,,,31200,46667

If not then post back here.
Cheers
Slime

------------------
Modem Forum (http://forums.gameplay.com/cgi-bin/ubb/forumdisplay.cgi?action=topics&number=31&SUBMIT=Go) Moderator
ISP Forum (http://forums.gameplay.com/cgi-bin/ubb/forumdisplay.cgi?action=topics&forum=Internet+Service+Providers&number=73&DaysPrune=) Moderator
Message Board Community Liaison

LagLess.com (http://www.lagless.com) - Slime's Modem&DUN Guide

[MTL^Starman]

lo m8,

is does'nt seem to work anymore, is there any other way of getting my modem (Creative Modem Blaster Flash56 DE5720) to only use 56k Flex?

Thanks
Starman

------------------
Clan Metal - Q2/3 Clan
www.clan-metal.co.uk
irc.barrysworld.com #metal

Clan Fang - UT Clan
www.clan-fang.co.uk
irc.barrysworld.com
#fang

[Elexis Sin]

Use this...

AT+MS=12,0,40000,50667

I had EXACTLY the same problem connected at 56,000bps and i couldn't do nowt that was with my Diamond Supraexpress 56e PRO. But the string above SHOULD sort out your problem too.

Emma

[This message has been edited by Elexis Sin (edited 03-05-2000).]