strange happenings!

[Deathwish2000]

I just got a Diamond Supra 56i Pro for my other pc, i installed the software ok and the modem ok, i re-configured my DUN, i connected to Freeserve 0845 but after about 60seconds it disconnects me, its the same with all other isp's, it worked fine in another pc, could it be to do with the cable i am using? im not using the cable it came with, just one i had lying around ???

Thanks

[Deathwish2000]

erk, no one to my rescue? damn :angry:

I have since tried my own Supra 56E Pro external and it does exactly the same so i have ruled out the cable theory, any other sugestions (sp?) :)

Thanks

[Big D]

Hiya mate, theres a setting in advanced connection options that mentions Auto Disconnect, check that

right hand click on Internet explorer Icon, properties/connections/advanced I think,

if not post a copt of the modem log and letme looksee

D;)

[Deathwish2000]

ok cheers :P


12-17-2000 11:25:03.15 - SupraExpress 56i PRO in use.
12-17-2000 11:25:03.15 - Modem type: SupraExpress 56i PRO
12-17-2000 11:25:03.15 - Modem inf path: DIAMON~2.INF
12-17-2000 11:25:03.15 - Modem inf section: Modem
12-17-2000 11:25:04.08 - 57600,N,8,1
12-17-2000 11:25:04.08 - 57600,N,8,1
12-17-2000 11:25:04.08 - Initializing modem.
12-17-2000 11:25:04.08 - Send: AT<cr>
12-17-2000 11:25:04.09 - Recv: <cr><lf>OK<cr><lf>
12-17-2000 11:25:04.09 - Interpreted response: Ok
12-17-2000 11:25:04.09 - Send: AT&FE0V1S0=0&C1&D2+MR=2;+DR=1;+ER=1<cr>
12-17-2000 11:25:04.09 - Recv: <cr><lf>OK<cr><lf>
12-17-2000 11:25:04.09 - Interpreted response: Ok
12-17-2000 11:25:04.09 - Send: ATS7=60M1+ES=3,0,2;+DS=3;+IFC=2,2;<cr>
12-17-2000 11:25:04.09 - Recv: <cr><lf>OK<cr><lf>
12-17-2000 11:25:04.09 - Interpreted response: Ok
12-17-2000 11:25:04.09 - Send: AT+MS=V90;X4<cr>
12-17-2000 11:25:04.10 - Recv: <cr><lf>OK<cr><lf>
12-17-2000 11:25:04.10 - Interpreted response: Ok
12-17-2000 11:25:04.10 - Dialing.
12-17-2000 11:25:04.10 - Send: ATDT;<cr>
12-17-2000 11:25:05.70 - Recv: <cr><lf>OK<cr><lf>
12-17-2000 11:25:05.70 - Interpreted response: Ok
12-17-2000 11:25:05.72 - Dialing.
12-17-2000 11:25:05.72 - Send: ATDT###########<cr>
12-17-2000 11:25:26.63 - Recv: <cr><lf>+MCR: V90<cr><lf>
12-17-2000 11:25:26.63 - Interpreted response: Informative
12-17-2000 11:25:26.63 - Recv: <cr><lf>+MRR: 33333<cr><lf>
12-17-2000 11:25:26.63 - Interpreted response: Informative
12-17-2000 11:25:31.63 - Recv: <cr><lf>+ER: LAPM<cr><lf>
12-17-2000 11:25:31.63 - Interpreted response: Informative
12-17-2000 11:25:31.63 - Recv: <cr><lf>+DR: V42B<cr><lf>
12-17-2000 11:25:31.63 - Interpreted response: Informative
12-17-2000 11:25:31.63 - Recv: <cr><lf>CONNECT 57600<cr><lf>
12-17-2000 11:25:31.63 - Interpreted response: Connect
12-17-2000 11:25:31.63 - Connection established at 33333bps.
12-17-2000 11:25:31.63 - Error-control on.
12-17-2000 11:25:31.63 - Data compression on.
12-17-2000 11:28:18.69 - Remote modem hung up.
12-17-2000 11:28:18.69 - Recv: <cr><lf>NO CARRIER<cr><lf>
12-17-2000 11:28:18.69 - Interpreted response: No Carrier
12-17-2000 11:28:18.72 - Hanging up the modem.
12-17-2000 11:28:18.72 - Send: ATH<cr>
12-17-2000 11:28:18.72 - Recv: <cr><lf>OK<cr><lf>
12-17-2000 11:28:18.72 - Interpreted response: Ok
12-17-2000 11:28:18.72 - 57600,N,8,1
12-17-2000 11:28:19.74 - Session Statistics:
12-17-2000 11:28:19.74 - Reads : 292679 bytes
12-17-2000 11:28:19.74 - Writes: 33980 bytes
12-17-2000 11:28:19.74 - SupraExpress 56i PRO closed.

[Big D]

Got a few init strings in there, any of them set to establish a conn at a certain rate, is it then chucking you out cos your not reaching that connection speed.

I also see that you connect in this instance @ 33333, bloody low mate, very "DACSy" Bt haven't gone and split your line on the sly have they?

Anyway check your innit strings?

[Deathwish2000]

huh? i dont want to have any strings! and yes BT DACS'd my other line, not this one! :)

But it should still wurk :(

[Deathwish2000]

any help meeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee :E

[Brocken]

Originally posted by Deathwish2000
huh? i dont want to have any strings! and yes BT DACS'd my other line, not this one! :)

But it should still wurk :(
you've got 3 phone lines?

[Xellpher]

DW2000

Go into the DUN properties and onto the server types tab.

Uncheck the 'Enable software compression'

Freeserve don't like it very much

:tongue:Xellpher

[Deathwish2000]

OK will try, and yeah i have a few phone lines :E

[<TOP>_PETEC]

Try paying your monthly fees 4 3serve and bt
:)

[Deathwish2000]

hush you :)