Scanner Probs

[PrEsSuRe_dRoP]

Hi,
I got a little problem and it goes a little something like this :-

When I install my scanner (card) which is a ISA card, and boot up windows it gets as far as the clock count and then the screen goes black with a blinking cursor =(

This never used to happen b4 i changed mobo's ..
Ive spoke to a few ppl and they reckon it could an irq confliction.. Ive tried assingning ISA to every irq in the list still no joy =( Im running out of ideas....


- Scanner Hewlett packard scanjet 5p
- OS Windows 98
If any one can help buzz back here

cheers

==++==++==++==++==++==++==++==

[PrEsSuRe_dRoP]

someone must know something i could try?
:burp:

Ive actually tried installing the scanner while windows had already booted and it works fine...

I know that was nuts but im nuts =)

anywayz i know its not the scanner coz that works
just wont get past a cold boot


hope someone out there can advise me =)


==__==__==__==__==__==__==__==__
cheers, thanx, ta

[Calzor Suzay]

Is it a HP mini scsi interface card??
If so is there a jumper on it?

[PrEsSuRe_dRoP]

im not sure if it has do i just need to
switch the jumper?

[[HLnC]Jay-Dee]

u can't 'switch' a jumper

u might have to take the jumper right off the pins or if there are for example 3 pins move it from covering 1 and 2, to cover 2 and 3 :)